Extracted anim. Added holodisk spec.

anim.scad

@@ -0,0 +1,14 @@
+// animation
+function get_anim_keys() = [
+0, // initial
+0.1, // resting
+0.3, // holodisk inserted
+0.4, // laser raised
+0.5, // start playing
+0.7, // stop playing
+0.8, // laser lowered, holodisk removing
+1 // final
+];
+
+function anim(key_from, key_to, KEYS=get_anim_keys())
+    = max(0, min(($t - KEYS[key_from]) / (KEYS[key_to] - KEYS[key_from]), 1));

fallout_holodisk.scad

@@ -6,48 +6,10 @@
  * Related: http://cedmagic.com/history/holotape.html
  */
 
-width=55;
-depth=100;
-height=16;
-wall=3;
-plate=3;
-top_rim=2;
-bolt_headtype="hex";
-front_body_depth=12;
-front_body_bolt_offset=8;
-back_bumpers_radius=5;
-back_bumpers_bolt_size=3;
-tape_height=5;
-tape_thickness=0.2;
-spool_tape_tolerance=1;
-spool_inner_height=tape_height+spool_tape_tolerance;
-spool_inner_radius=4;
-spool_outer_radius=18;
-spool_plate_height=2;
-spool_plate_holes=3;
-spool_plate_hole_angle=360/spool_plate_holes * 0.5;
-spool_plate_hole_inner_rim=1;
-spool_plate_hole_outer_rim=4;
-spool_slit_depth=0.8;
-spool1_depth=depth*0.77;
-spool2_depth=depth*0.40;
-spool3_depth=(spool1_depth+spool2_depth)/2;
-spool4_depth=depth*0.16;
-main_spools_x=width * 0.45;
-aux_spools_right_x=main_spools_x + spool_outer_radius + 1;
-aux_spools_left_x=main_spools_x - 13;
-middle_spool_in_r=2;
-middle_spool_out_r=7;
-aux_spool_plate_hole_inner_rim=2;
-aux_spool_plate_hole_outer_rim=2;
-spindle_diam=2;
-spindle_diam_tolerance=0.2;
-tape_z=plate+spool_plate_height;
-
 // dependency: https://github.com/revarbat/BOSL
-use <BOSL/transforms.scad>
+
-use <BOSL/metric_screws.scad>
+use <holodisk_spec.scad>
-use <BOSL/masks.scad>
+use <anim.scad>
 
 include <holodisk.scad>
 include <reader.scad>

holodisk.scad

@@ -1,11 +1,55 @@
 // dependency: https://github.com/revarbat/BOSL
 use <BOSL/transforms.scad>
-use <BOSL/metric_screws.scad>
+//use <BOSL/metric_screws.scad>
 use <BOSL/masks.scad>
 
+use <holodisk_spec.scad>
+use <anim.scad>
+
 include <tape.scad>
 
-module frame() {
+disk_size = get_holodisk_size();
+holodisk_size = get_holodisk_size();
+wall=3;
+plate=3;
+top_rim=2;
+bolt_headtype="hex";
+front_body_depth=12;
+front_body_bolt_offset=8;
+back_bumpers_radius=5;
+back_bumpers_bolt_size=3;
+tape_height=5;
+tape_thickness=0.2;
+spool_tape_tolerance=1;
+spool_inner_height=tape_height+spool_tape_tolerance;
+spool_inner_radius=4;
+spool_outer_radius=18;
+spool_plate_height=2;
+spool_plate_holes=3;
+spool_plate_hole_angle=360/spool_plate_holes * 0.5;
+spool_plate_hole_inner_rim=1;
+spool_plate_hole_outer_rim=4;
+spool_slit_depth=0.8;
+spool1_depth=disk_size.y*0.77;
+spool2_depth=disk_size.y*0.40;
+spool3_depth=(spool1_depth+spool2_depth)/2;
+spool4_depth=disk_size.y*0.16;
+main_spools_x=disk_size.x*0.45;
+aux_spools_right_x=main_spools_x + spool_outer_radius + 1;
+aux_spools_left_x=main_spools_x - 13;
+middle_spool_in_r=2;
+middle_spool_out_r=7;
+aux_spool_plate_hole_inner_rim=2;
+aux_spool_plate_hole_outer_rim=2;
+spindle_diam=2;
+spindle_diam_tolerance=0.2;
+tape_z=plate+spool_plate_height;
+
+module frame(size) {
+    width=size.x;
+    depth=size.y;
+    height=size.z;
+    
     tr=top_rim;
     tc=tr*1.5;
     fbd=front_body_depth;
@@ -76,21 +120,64 @@ module frame() {
         }
     }
     
+    module slides() {
+        slide_size = get_holodisk_slide_size();
+            slide_pos = get_holodisk_slide_pos();
+            slide_plate_size = [0.1, slide_size.y, slide_size.z]; 
+            sliding_size = get_holodisk_slide_sliding_size();
+            sliding_pos = get_holodisk_slide_sliding_pos();
+        
+        module slide() {
+            hull() {
+                translate(sliding_pos) cube(sliding_size);
+                translate(slide_pos) cube(slide_plate_size);
+            }
+        }
+        
+        module slider() {
+            slider_size = get_holodisk_slide_slider_size();
+            slider_pos = get_holodisk_slide_slider_pos();
+            slider_plate_size = [0.1, slider_size.y, slider_size.z]; 
+            slider_top_size = [slider_size.x, slider_size.y, sliding_size.z]; 
+            hull() {
+                up((slider_size.z-sliding_size.z)/2) translate(slider_pos) cube(slider_top_size);
+                translate(slider_pos) cube(slider_plate_size);
+            }
+        }
+            
+        right(get_holodisk_size().x) {
+           slide();
+           slider();
+        }
+        scale([-1,1,1]) {
+            slide();
+            slider();
+        }
+    }
+    
     module bottom_cover() {
-        linear_extrude(height=plate) {
+        difference() {
-            back_bumpers();
+            linear_extrude(height=plate) {
-            square([width, depth]);
+                back_bumpers();
+                square([width, depth]);
+            }
+            down(0.1) translate(get_holodisk_laser_cutout_pos()) cube(get_holodisk_laser_cutout_size());
         }
     }
     
     color("SaddleBrown") top_cover();
     color("grey") walls();
+    color("Silver") slides();
     color("SaddleBrown") bottom_cover();
-    color("silver") back_bolts();
+    //color("silver") back_bolts();
-    color("silver") front_bolts();
+    //color("silver") front_bolts();
 }
 
-module mechanism() {
+module mechanism(size) {
+    width=size.x;
+    depth=size.y;
+    height=size.z;
+    
     module spool(r_in, r_out, in_rim, out_rim) {
         module spindle(d, h) {
             color("Sienna") cylinder(h=h, d=d);
@@ -180,9 +267,12 @@ module mechanism() {
     tapes();
 }
 
-module holodisk() {
+module holodisk(size) {
-    #frame();
+    frame(size);
-    mechanism();
+    mechanism(size);
 }
 
-holodisk();
+retraction=holodisk_size.y+10;
+back((1-anim(1, 2)) * retraction) // anim insert
+back((anim(len(get_anim_keys())-2, len(get_anim_keys())-1)) * retraction) // anim remove
+holodisk(holodisk_size);

holodisk_spec.scad

@@ -0,0 +1,61 @@
+/*
+ * Technical Specification for Wattz Electronics Holodisk (AKA Holotape or THT)
+ *
+ */
+
+// -- core dimensions --
+
+function get_holodisk_size() = [55, 100, 16];
+
+// -- tape --
+
+function get_holodisk_tape_height() = 5;
+
+// -- slide --
+
+spz = 8;
+function get_holodisk_slide_size() = [2, 35, get_holodisk_size().z - spz];
+
+function get_holodisk_slide_pos() = [0, 15, spz/2];
+
+sy = 2;
+sz = 4;
+function get_holodisk_slide_sliding_size() = [get_holodisk_slide_size().x, get_holodisk_slide_size().y - sy, get_holodisk_slide_size().z - sz];
+
+function get_holodisk_slide_sliding_pos() = [get_holodisk_slide_pos().x, get_holodisk_slide_pos().y + sy/2, get_holodisk_slide_pos().z + sz/2];
+
+srx = 2;
+srz = 2;
+function get_holodisk_slide_slider_size() = [get_holodisk_slide_size().x + srx, 15, get_holodisk_slide_size().z + srz];
+
+function get_holodisk_slide_slider_pos() = [get_holodisk_slide_sliding_pos().x, get_holodisk_slide_sliding_pos().y, get_holodisk_slide_sliding_pos().z - get_holodisk_slide_slider_size().z/2 + srz];
+
+// -- laser --
+
+function get_holodisk_laser_cutout_size() = [15, 9, 20];
+
+function get_holodisk_laser_cutout_pos() = [
+    get_holodisk_size().x/2 - get_holodisk_laser_cutout_size().x/2,
+    12,
+    0];
+    
+function get_holodisk_laser_cutout_pos_center() = [
+    get_holodisk_laser_cutout_pos().x + get_holodisk_laser_cutout_size().x/2,
+    get_holodisk_laser_cutout_pos().y + get_holodisk_laser_cutout_size().y/2,
+    get_holodisk_laser_cutout_pos().z + get_holodisk_laser_cutout_size().z/2];
+
+// -- laser-window --
+
+function get_holodisk_laserwindow_pos_center() = [
+    get_holodisk_laser_cutout_pos_center().x,
+    0,
+    6.5
+    ];
+
+function get_holodisk_laserwindow_size() = [
+    get_holodisk_laser_cutout_size().x,
+    30,
+    get_holodisk_tape_height() + 2
+    ];
+    
+// -- END --

reader.scad

@@ -1,52 +1,53 @@
 // dependency: https://github.com/revarbat/BOSL
 use <BOSL/transforms.scad>
 
+use <holodisk_spec.scad>
+
+include <anim.scad>
+
 // outside config
-width=60;
-height=15;
-depth=100;
 tape_height=5;
 tape_z=4;
 
-// local config
-frame=5;
-head_frame=2;
-head_size=[14, 10, tape_height+head_frame*2];
-head_pos=[width/2, -frame+2, tape_z-head_frame];
-laser_size=[10, 2, tape_height];
-laser_pos=[head_pos.x, head_pos.y + 10 + head_size.y, tape_z];
-laser_tower_size=[laser_size.x+2, laser_size.y+1, 15];
 
-module reader() {
+module reader(disk_size) {
+    width=disk_size.x;
+    depth=disk_size.y;
+    height=disk_size.z;
+
+    laser_cutout_size = get_holodisk_laser_cutout_size();
+    laser_cutout_pos = get_holodisk_laser_cutout_pos_center();
+    
+    frame=5;
+    head_frame=2;
+    head_size=[14, 10, tape_height+head_frame*2];
+    head_pos=[laser_cutout_pos.x, -frame+2, tape_z-head_frame];
+    laser_size=[10, 2, tape_height];
+    laser_offset=3;
+    laser_pos=[laser_cutout_pos.x, laser_cutout_pos.y + laser_offset, tape_z];
+    laser_tower_size=[laser_cutout_size.x - 1, laser_cutout_size.y - 1 - laser_offset, 15];
+    
     module laser(corner=0.1) {
         up(laser_size.z/2)
         up(corner)
         color("Red")
-        minkowski() {
+        fwd(laser_cutout_size.y/3) cube(laser_size, center=true);
-            s=[laser_size.x, laser_size.y, laser_size.z-corner*2];
-            cube(s, center=true);
-            sphere(corner);
-        }
     }
     
-    module laser_tower(corner=2) {
+    module laser_tower(corner=1) {
         color("DarkSlateBlue")
-        back(laser_tower_size.y-laser_size.y)
         difference() {
-            minkowski() {
+            up(laser_size.z/2)
-                s=[laser_tower_size.x, laser_tower_size.y, laser_tower_size.z-corner*2];
+            fwd(laser_offset/2) scale(0.99) cube(laser_tower_size, center=true);
-                up(laser_size.z/2)
+            fwd(laser_size.y/3) scale(1.1) laser();
-                cube(s, center=true);
-                sphere(corner);
-            }
-            fwd(laser_tower_size.y) scale(1.05) laser();
         }
     }
     
     module head_space() {
-        stube=[head_size.x-head_frame*2, head_size.y+head_frame*3, head_size.z-head_frame*2];
+        /*stube=[head_size.x-head_frame*2, head_size.y+head_frame*3, head_size.z-head_frame*2];
         up(head_size.z/4 + head_frame)
-            cube(stube, center=true);
+            cube(stube, center=true);*/
+        translate(get_holodisk_laserwindow_pos_center()) cube(get_holodisk_laserwindow_size(), center=true);
     }
     
     module head(corner=0.5) {
@@ -57,14 +58,19 @@ module reader() {
             s=[head_size[0], head_size[1] + frame, head_size[2]-corner*2];
             
             difference() {
-                up(head_size.z/2) cube(s, center=true);
+                translate(head_pos) up(head_size.z/2) cube(s, center=true);
                 head_space();
             }
             sphere(corner);
         }
     }
    
-    translate(head_pos) head();
+    head();
+    
+    retraction=laser_tower_size.z;
+    down(retraction)
+    up(anim(2, 3)*retraction)
+    down(anim(5, 6)*retraction)
     translate(laser_pos) {
         laser();
         laser_tower();
@@ -73,10 +79,12 @@ module reader() {
     color("DarkSlateBlue") {
         difference() {
             fwd(frame) cube([width, frame, height]);
-            translate(head_pos) head_space();
+            head_space();
         }
         fwd(frame) down(frame) cube([width, depth + frame, frame]);
     }
 }
 
-reader();
+holodisk_size = is_undef(disk_size) ? [50, 100, 20] : disk_size;
+
+reader(holodisk_size);