Add buttons proxy. Moved bottom comps divider and changed rim rails.

This commit is contained in:
Dejvino 2021-01-11 19:33:19 +01:00
parent b4ecb1c922
commit 9b15bc71dc

View File

@ -9,6 +9,7 @@ use <BOSL/sliders.scad>
//validation = 1;
XRAY_POSITIVE=1;
XRAY_BACKPLANE=2;
XRAY_BOTTOM=3;
//xray = 2;
// EXPORT:
@ -18,7 +19,8 @@ MODEL_HARNESS_BOTTOM_PIP=3;
MODEL_HARNESS_TOP=4;
MODEL_HARNESS_SLIDER_FRONT=5;
MODEL_HARNESS_SLIDER_BACK=6;
export=3; // [0:6]
MODEL_HARNESS_BUTTONS=7;
export=0; // [0:7]
function is_not_export() = is_undef(export) || export == 0;
function is_export() = !is_not_export();
function is_model_strict(m) = is_export() && export == m;
@ -57,7 +59,7 @@ module phone_harness() {
rim_edge_tolerance=0.4;
expose_back_camera=false;
screwmount_screw=3;
harness_divider=[16, 0, 1.3];
harness_divider=[1, 0, 1.3];
harness_size=[ps.x+shell_wall*2, ps.y+shell_wall*2, ps.z+shell_wall*2];
rim_size=[harness_size.x+2*shell_rim_wall, harness_size.y+2*shell_rim_wall, 6];
@ -151,11 +153,19 @@ module phone_harness() {
rail_wall=1;
slider_slop=0.1;
slider_len_back=hs.x*0.3;
slider_len_front=hs.x*0.3;
slider_len_front=hs.x*0.15;
module harness_slider(l) {
base=2;
ss=[l, shell_rim_wall, rim_size.z+rail_wall*2];
up(ss.y + base) xrot(180) slider(l=ss.x, w=ss.z, h=ss.y, base=base, chamfer=0.9, wall=2, ang=rail_angle, slop=slider_slop, orient=ORIENT_X, align=V_UP);
up(ss.y + base) xrot(180) difference() {
slider(l=ss.x, w=ss.z, h=ss.y, base=base, chamfer=0.9, wall=2, ang=rail_angle, slop=slider_slop, orient=ORIENT_X, align=V_UP);
screws=2;
screws_area_l=0.7*l;
for (i=[0:screws-1]) {
$fn=$preview ? 6 : 16;
#right(-screws_area_l/2 + screws_area_l/(screws-1) * i) cylinder(d2=screwmount_screw*0.5, d1=screwmount_screw, h=ss.y/2);
}
}
}
module harness_rail(l) {
sw=2;
@ -246,13 +256,53 @@ module phone_harness() {
}
// -- FRONT --
buttons_cutout_size=[42, 100, 4.5];
buttons_cutout_pos=[ps.x/2 - 44.5, -ps.y/2 - 3, 0.25];
module buttons_cutout() {
s=[42, 100, 5];
fwd(ps.y/2) right(ps.x/2 - 44.5) cubi(s, fillet=1);
s=buttons_cutout_size;
p=buttons_cutout_pos;
translate(p) cubi(s, fillet=1);
}
module front_cutout() {
buttons_cutout();
}
module front_buttons(socket) {
s=[buttons_cutout_size.x-2, 4, buttons_cutout_size.z-0.5];
p=buttons_cutout_pos;
t=socket ? 0.2 : 0;
pin_size=[3 + t, 3 + t, s.z+1.4 + t/2];
touch_size=[2, s.y, 2];
touch_power_size=[3, touch_size.y, touch_size.z];
translate(p) {
cs=[4, s.y, s.z];
left(5) {
bs=[13, s.y, s.z];
left(bs.x/6) cubi(pin_size);
left(bs.x/2) {
difference() {
cubi(bs);
back(2) cubi(cs);
}
}
fwd(1) left(bs.x*0.8) cubi(touch_power_size, fillet=1);
}
right(8) {
bs=[18, s.y, s.z];
cubi(pin_size);
difference() {
cubi(bs);
back(2) {
left(bs.x/4) cubi(cs);
right(bs.x/4) cubi(cs);
}
}
fwd(1) {
left(bs.x*0.4) cubi(touch_size, fillet=1);
right(bs.x*0.4) cubi(touch_size, fillet=1);
}
}
}
}
// ==== MODEL ====
@ -281,6 +331,7 @@ module phone_harness() {
shell();
shell_rim_edge(rim_edge_thickness, groove=true, tolerance=rim_edge_tolerance);
shell_cutouts();
front_buttons(socket=true);
}
}
shell_backplane(groove=false);
@ -291,11 +342,13 @@ module phone_harness() {
difference() {
shell();
shell_cutouts();
front_buttons(socket=true);
}
}
difference() {
shell_rim_edge(rim_edge_thickness, groove=false);
shell_cutouts();
front_buttons(socket=true);
}
}
module model_harness_slider_front() {
@ -307,6 +360,9 @@ module phone_harness() {
module model_harness_slider_back() {
back(hs.y/2) xrot(-90) harness_slider(slider_len_back);
}
module model_harness_buttons() {
front_buttons(socket=false);
}
if (is_model(MODEL_HARNESS_LEFT)) model_harness_left();
if (is_model(MODEL_HARNESS_RIGHT)) model_harness_right();
@ -317,6 +373,7 @@ module phone_harness() {
if (is_model(MODEL_HARNESS_TOP)) model_harness_top();
if (is_model(MODEL_HARNESS_SLIDER_FRONT)) model_harness_slider_front();
if (is_model(MODEL_HARNESS_SLIDER_BACK)) model_harness_slider_back();
if (is_model(MODEL_HARNESS_BUTTONS)) model_harness_buttons();
}
module model() {
@ -335,6 +392,8 @@ if (!is_undef(validation)) {
span_cube([0,1000], [0,1000], [-1000,1000]);
} else if (xray == XRAY_BACKPLANE) {
span_cube([-1000,1000], [-1000,1000], [-1000,-7]);
} else if (xray == XRAY_BOTTOM) {
span_cube([-1000,1000], [-1000,1000], [-1000,0]);
}
}
union() {