diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..92001b5
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1 @@
+secrets.h
\ No newline at end of file
diff --git a/README.md b/README.md
index d764b77..c1f8d72 100644
--- a/README.md
+++ b/README.md
@@ -51,8 +51,9 @@ This project turns an ESP32 into a smart device that monitors a washing machine'
         - `BH1750` by Christopher Laws
 
 2.  **Configure the Code:**
-    - Open the `esp32_MachineNotify.ino` file.
-    - Replace the placeholder values for `WIFI_SSID`, `WIFI_PASSWORD`, and `NTFY_TOPIC` with your WiFi credentials and desired `ntfy.sh` topic.
+    - Copy `secrets_template.h` to a new file named `secrets.h` in the same directory.
+    - Open `secrets.h` and populate `SECRET_WIFI_SSID`, `SECRET_WIFI_PASSWORD`, and `SECRET_NTFY_TOPIC` with your WiFi credentials and desired `ntfy.sh` topic.
+    - The `secrets.h` file is ignored by git to keep your credentials safe.
 
 3.  **Upload the Code:**
     - Connect your ESP32 board to your computer.
diff --git a/esp32_MachineNotify.ino b/esp32_MachineNotify.ino
index cba7ea6..49bd240 100644
--- a/esp32_MachineNotify.ino
+++ b/esp32_MachineNotify.ino
@@ -1,4 +1,5 @@
 #include <Wire.h>
+#include "secrets.h"
 
 // Feature Configuration - Comment out to disable
 #define ENABLE_SENSORS
@@ -22,12 +23,16 @@
 
 // WiFi credentials
 #ifdef ENABLE_WIFI
-const char* WIFI_SSID = "YOUR_WIFI_SSID";
-const char* WIFI_PASSWORD = "YOUR_WIFI_PASSWORD";
+const char* WIFI_SSID = SECRET_WIFI_SSID;
+const char* WIFI_PASSWORD = SECRET_WIFI_PASSWORD;
 #endif
 
 // ntfy.sh topic
-const char* NTFY_TOPIC = "YOUR_NTFY_TOPIC";
+const char* NTFY_TOPIC = SECRET_NTFY_TOPIC;
+
+// Device Names
+const char* DEVICE1_NAME = "Dryer"; // Monitored by Vibration
+const char* DEVICE2_NAME = "Washer";  // Monitored by Light
 
 // Pin definitions
 const int VIBRATION_PIN = 4;
@@ -56,7 +61,6 @@ const int VIBRATION_WINDOW_SIZE = 4; // X * 5s seconds window
 // Device state
 bool isVibrationActive = false;
 bool isLightActive = false;
-bool isDeviceActive = false;
 
 // Time tracking for sensor states
 unsigned long lastVibrationCheckTime = 0;
@@ -74,9 +78,13 @@ int displayDataLines = displayTextLines;
 #endif
 
 // Notification queue
-String queuedNotification = "";
-String queuedTitle = "";
-String queuedPriority = "";
+String queuedMessage1 = "";
+String queuedTitle1 = "";
+String queuedPriority1 = "";
+
+String queuedMessage2 = "";
+String queuedTitle2 = "";
+String queuedPriority2 = "";
 
 #ifdef ENABLE_SENSORS
 unsigned long vibrationHistory[VIBRATION_WINDOW_SIZE];
@@ -173,14 +181,20 @@ void updateDisplay();
 void loop() {
   #ifdef ENABLE_NOTIFICATIONS
   // Try to send any queued notification
-  if (queuedNotification != "") {
-    if (sendNotification(queuedNotification, queuedTitle, queuedPriority)) {
-      Serial.println("Successfully sent queued notification.");
-      queuedNotification = ""; // Clear queue
-      queuedTitle = "";
-      queuedPriority = "";
-    } else {
-      // Failed, will retry on next loop
+  if (queuedMessage1 != "") {
+    if (sendNotification(queuedMessage1, queuedTitle1, queuedPriority1)) {
+      Serial.println("Successfully sent queued notification 1.");
+      queuedMessage1 = ""; // Clear queue
+      queuedTitle1 = "";
+      queuedPriority1 = "";
+    }
+  }
+  if (queuedMessage2 != "") {
+    if (sendNotification(queuedMessage2, queuedTitle2, queuedPriority2)) {
+      Serial.println("Successfully sent queued notification 2.");
+      queuedMessage2 = ""; // Clear queue
+      queuedTitle2 = "";
+      queuedPriority2 = "";
     }
   }
   #endif
@@ -194,6 +208,9 @@ void loop() {
   float currentLightLevel = 0.0;
   #endif
 
+  bool previousVibrationState = isVibrationActive;
+  bool previousLightState = isLightActive;
+
   // Vibration state change logic
   #ifdef ENABLE_SENSORS
   if (currentTime - lastVibrationCheckTime >= VIBRATION_STATE_CHANGE_INTERVAL) {
@@ -251,30 +268,52 @@ void loop() {
     lightHighStartTime = 0;
   }
 
-
-  // Overall device state
-  bool previousDeviceState = isDeviceActive;
-  isDeviceActive = isVibrationActive || isLightActive;
-
-  if (isDeviceActive != previousDeviceState) {
+  // Device 1 (Vibration) Notifications
+  if (isVibrationActive != previousVibrationState) {
     String message;
     String title;
     String priority;
-    if (isDeviceActive) {
-      message = "Washing machine cycle started.";
-      title = "Machine START";
+    if (isVibrationActive) {
+      message = String(DEVICE1_NAME) + " started.";
+      title = String(DEVICE1_NAME) + " START";
       priority = "default";
     } else {
-      message = "Washing machine cycle finished.";
-      title = "Machine END";
+      message = String(DEVICE1_NAME) + " finished.";
+      title = String(DEVICE1_NAME) + " END";
       priority = "high";
     }
 
     #ifdef ENABLE_NOTIFICATIONS
     if (!sendNotification(message, title, priority)) {
-      queuedNotification = message; // Failed to send, queue it (overwrites any older one)
-      queuedTitle = title;
-      queuedPriority = priority;
+      queuedMessage1 = message;
+      queuedTitle1 = title;
+      queuedPriority1 = priority;
+    }
+    #else
+    Serial.println("Notification (Disabled): " + title + " - " + message);
+    #endif
+  }
+
+  // Device 2 (Light) Notifications
+  if (isLightActive != previousLightState) {
+    String message;
+    String title;
+    String priority;
+    if (isLightActive) {
+      message = String(DEVICE2_NAME) + " active.";
+      title = String(DEVICE2_NAME) + " ACTIVE";
+      priority = "default";
+    } else {
+      message = String(DEVICE2_NAME) + " inactive.";
+      title = String(DEVICE2_NAME) + " INACTIVE";
+      priority = "high";
+    }
+
+    #ifdef ENABLE_NOTIFICATIONS
+    if (!sendNotification(message, title, priority)) {
+      queuedMessage2 = message;
+      queuedTitle2 = title;
+      queuedPriority2 = priority;
     }
     #else
     Serial.println("Notification (Disabled): " + title + " - " + message);
@@ -283,10 +322,10 @@ void loop() {
 
   #ifdef ENABLE_DISPLAY
   // Update display data
-  displayData[0] = "Vibra: " + String(vibrationWindowTotal);
-  displayData[1] = "     : " + String(isVibrationActive ? "ON" : "OFF");
-  displayData[2] = "Light: " + String(currentLightLevel) + " lx";
-  displayData[3] = "     : " + String(isLightActive ? "ON" : "OFF");
+  displayData[0] = String(DEVICE1_NAME) + ": " + String(vibrationWindowTotal);
+  displayData[1] = "Vibra: " + String(isVibrationActive ? "ON" : "OFF");
+  displayData[2] = String(DEVICE2_NAME) + ": " + String(currentLightLevel, 0);
+  displayData[3] = "Light: " + String(isLightActive ? "ON" : "OFF");
   displayDataLines = 4;
 
   // Update display
@@ -342,9 +381,11 @@ void updateDisplay() {
 
   // Draw active status indicator
   int rectWidth = 10;
-  int rectHeight = SCREEN_HEIGHT;
+  int rectHeight = (SCREEN_HEIGHT / 2) - 2;
   int rectX = 2;
-  int rectY = (SCREEN_HEIGHT - rectHeight) / 2;
+  int rectY1 = 1;
+  int rectY2 = (SCREEN_HEIGHT / 2) + 1;
+  
   int textX = rectX + rectWidth + 4;
 
   for (int i = 0; i < displayDataLines; i++) {
@@ -353,12 +394,20 @@ void updateDisplay() {
     display.println(displayData[lineIndex]);
   }
 
-  display.drawRect(rectX, rectY, rectWidth, rectHeight, WHITE);
-
-  if (isDeviceActive) {
+  // Draw Device 1 Indicator (Top)
+  display.drawRect(rectX, rectY1, rectWidth, rectHeight, WHITE);
+  if (isVibrationActive) {
     int innerWidth = rectWidth - 4;
     int step = (millis() / 150) % (innerWidth + 1);
-    display.fillRect(rectX + 2, rectY + 2, step, rectHeight - 4, WHITE);
+    display.fillRect(rectX + 2, rectY1 + 2, step, rectHeight - 4, WHITE);
+  }
+
+  // Draw Device 2 Indicator (Bottom)
+  display.drawRect(rectX, rectY2, rectWidth, rectHeight, WHITE);
+  if (isLightActive) {
+    int innerWidth = rectWidth - 4;
+    int step = (millis() / 150) % (innerWidth + 1);
+    display.fillRect(rectX + 2, rectY2 + 2, step, rectHeight - 4, WHITE);
   }
 
   display.display();
diff --git a/secrets_template.h b/secrets_template.h
new file mode 100644
index 0000000..024a12e
--- /dev/null
+++ b/secrets_template.h
@@ -0,0 +1,20 @@
+/*
+ * secrets_template.h
+ *
+ * INSTRUCTIONS:
+ * 1. Copy this file to a new file named "secrets.h" in the same directory.
+ * 2. Open "secrets.h" and populate the values below with your actual configuration.
+ * 3. "secrets.h" is excluded from version control to protect your sensitive data.
+ */
+
+#ifndef SECRETS_H
+#define SECRETS_H
+
+// WiFi credentials
+#define SECRET_WIFI_SSID "YOUR_WIFI_SSID"
+#define SECRET_WIFI_PASSWORD "YOUR_WIFI_PASSWORD"
+
+// ntfy.sh topic
+#define SECRET_NTFY_TOPIC "YOUR_NTFY_TOPIC"
+
+#endif
\ No newline at end of file