.gitignore

@@ -1 +0,0 @@
-secrets.h

README.md

@@ -51,9 +51,8 @@ This project turns an ESP32 into a smart device that monitors a washing machine'
         - `BH1750` by Christopher Laws
 
 2.  **Configure the Code:**
-    - Copy `secrets_template.h` to a new file named `secrets.h` in the same directory.
-    - Open `secrets.h` and populate `SECRET_WIFI_SSID`, `SECRET_WIFI_PASSWORD`, and `SECRET_NTFY_TOPIC` with your WiFi credentials and desired `ntfy.sh` topic.
-    - The `secrets.h` file is ignored by git to keep your credentials safe.
+    - Open the `esp32_MachineNotify.ino` file.
+    - Replace the placeholder values for `WIFI_SSID`, `WIFI_PASSWORD`, and `NTFY_TOPIC` with your WiFi credentials and desired `ntfy.sh` topic.
 
 3.  **Upload the Code:**
     - Connect your ESP32 board to your computer.

esp32_MachineNotify.ino

@@ -1,11 +1,10 @@
 #include <Wire.h>
-#include "secrets.h"
 
 // Feature Configuration - Comment out to disable
 #define ENABLE_SENSORS
 #define ENABLE_DISPLAY
-//#define ENABLE_WIFI
-//#define ENABLE_NOTIFICATIONS
+#define ENABLE_WIFI
+#define ENABLE_NOTIFICATIONS
 
 #ifdef ENABLE_WIFI
 #include <WiFi.h>
@@ -23,23 +22,19 @@
 
 // WiFi credentials
 #ifdef ENABLE_WIFI
-const char* WIFI_SSID = SECRET_WIFI_SSID;
-const char* WIFI_PASSWORD = SECRET_WIFI_PASSWORD;
+const char* WIFI_SSID = "YOUR_WIFI_SSID";
+const char* WIFI_PASSWORD = "YOUR_WIFI_PASSWORD";
 #endif
 
 // ntfy.sh topic
-const char* NTFY_TOPIC = SECRET_NTFY_TOPIC;
-
-// Device Names
-const char* DEVICE1_NAME = "Dryer"; // Monitored by Vibration
-const char* DEVICE2_NAME = "Washer";  // Monitored by Light
+const char* NTFY_TOPIC = "YOUR_NTFY_TOPIC";
 
 // Pin definitions
 const int VIBRATION_PIN = 4;
 
 // OLED display settings
 #define SCREEN_WIDTH 128
-#define SCREEN_HEIGHT 32
+#define SCREEN_HEIGHT 64
 #define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin)
 #define SCREEN_ADDRESS 0x3C
 #ifdef ENABLE_DISPLAY
@@ -52,67 +47,36 @@ BH1750 lightMeter;
 #endif
 
 // Thresholds
-const float LIGHT_ACTIVATION_THRESHOLD = 100.0;
-const float LIGHT_DEACTIVATION_THRESHOLD = 20.0;
+const float LIGHT_ACTIVATION_THRESHOLD = 200.0;
+const float LIGHT_DEACTIVATION_THRESHOLD = 10.0;
 const unsigned long VIBRATION_STATE_CHANGE_INTERVAL = 5000; // 5 seconds
-const unsigned long VIBRATION_ACTIVE_THRESHOLD = 10000;
-const int VIBRATION_WINDOW_SIZE = 4; // X * 5s seconds window
 
 // Device state
 bool isVibrationActive = false;
 bool isLightActive = false;
+bool isDeviceActive = false;
 
 // Time tracking for sensor states
-unsigned long lastVibrationCheckTime = 0;
+unsigned long vibrationLowStartTime = 0;
+unsigned long vibrationHighStartTime = 0;
 unsigned long lightHighStartTime = 0;
 unsigned long lightLowStartTime = 0;
 
 // OLED display data
 #ifdef ENABLE_DISPLAY
-String displayData[5];
+String displayData[4];
 int currentDisplayLine = 0;
 unsigned long lastDisplayScrollTime = 0;
-const unsigned long DISPLAY_SCROLL_INTERVAL = 2000; // 1000 = 1 second
-const int displayTextLines = 4;
-int displayDataLines = displayTextLines;
+const unsigned long DISPLAY_SCROLL_INTERVAL = 1000; // 1000 = 1 second
 #endif
 
 // Notification queue
-String queuedMessage1 = "";
-String queuedTitle1 = "";
-String queuedPriority1 = "";
-
-String queuedMessage2 = "";
-String queuedTitle2 = "";
-String queuedPriority2 = "";
-
-#ifdef ENABLE_SENSORS
-unsigned long vibrationHistory[VIBRATION_WINDOW_SIZE];
-int vibrationHistoryIdx = 0;
-unsigned long vibrationWindowTotal = 0;
-unsigned long vibrationTotalLow = 0;
-volatile unsigned long lastChangeTime = 0;
-volatile unsigned long lowTimeAccumulator = 0;
-volatile unsigned long highTimeAccumulator = 0;
-
-void IRAM_ATTR onChange() {
-  unsigned long now = micros();
-  unsigned long duration = now - lastChangeTime;
-  lastChangeTime = now;
-
-  if (digitalRead(VIBRATION_PIN) == HIGH) {
-    // Changed to HIGH, so previous state was LOW
-    lowTimeAccumulator += duration;
-  } else {
-    // Changed to LOW, so previous state was HIGH
-    highTimeAccumulator += duration;
-  }
-}
-#endif
+String queuedNotification = "";
+String queuedTitle = "";
+String queuedPriority = "";
 
 void setup() {
-  Serial.begin(9600);
-  Serial.println("Setup started.");
+  Serial.begin(115200);
 
   #if defined(ENABLE_SENSORS) || defined(ENABLE_DISPLAY)
   Wire.begin();
@@ -121,11 +85,6 @@ void setup() {
   #ifdef ENABLE_SENSORS
   // Initialize vibration sensor pin
   pinMode(VIBRATION_PIN, INPUT);
-  lastChangeTime = micros();
-  attachInterrupt(digitalPinToInterrupt(VIBRATION_PIN), onChange, CHANGE);
-
-  // Initialize history buffer
-  for(int i=0; i<VIBRATION_WINDOW_SIZE; i++) vibrationHistory[i] = 0;
 
   // Initialize light sensor
   if (!lightMeter.begin(BH1750::CONTINUOUS_HIGH_RES_MODE)) {
@@ -170,9 +129,6 @@ void setup() {
   display.display();
   delay(1000);
   #endif
-
-
-  Serial.println("Setup finished.");
 }
 
 bool sendNotification(String message, String title, String priority);
@@ -181,20 +137,14 @@ void updateDisplay();
 void loop() {
   #ifdef ENABLE_NOTIFICATIONS
   // Try to send any queued notification
-  if (queuedMessage1 != "") {
-    if (sendNotification(queuedMessage1, queuedTitle1, queuedPriority1)) {
-      Serial.println("Successfully sent queued notification 1.");
-      queuedMessage1 = ""; // Clear queue
-      queuedTitle1 = "";
-      queuedPriority1 = "";
-    }
-  }
-  if (queuedMessage2 != "") {
-    if (sendNotification(queuedMessage2, queuedTitle2, queuedPriority2)) {
-      Serial.println("Successfully sent queued notification 2.");
-      queuedMessage2 = ""; // Clear queue
-      queuedTitle2 = "";
-      queuedPriority2 = "";
+  if (queuedNotification != "") {
+    if (sendNotification(queuedNotification, queuedTitle, queuedPriority)) {
+      Serial.println("Successfully sent queued notification.");
+      queuedNotification = ""; // Clear queue
+      queuedTitle = "";
+      queuedPriority = "";
+    } else {
+      // Failed, will retry on next loop
     }
   }
   #endif
@@ -203,47 +153,35 @@ void loop() {
 
   // Sensor readings
   #ifdef ENABLE_SENSORS
+  bool currentVibrationState = (digitalRead(VIBRATION_PIN) == LOW);
   float currentLightLevel = lightMeter.readLightLevel();
   #else
+  bool currentVibrationState = false;
   float currentLightLevel = 0.0;
   #endif
 
-  bool previousVibrationState = isVibrationActive;
-  bool previousLightState = isLightActive;
-
   // Vibration state change logic
-  #ifdef ENABLE_SENSORS
-  if (currentTime - lastVibrationCheckTime >= VIBRATION_STATE_CHANGE_INTERVAL) {
-    lastVibrationCheckTime = currentTime;
-
-    noInterrupts();
-    unsigned long now = micros();
-    unsigned long duration = now - lastChangeTime;
-    lastChangeTime = now;
-
-    if (digitalRead(VIBRATION_PIN) == LOW) {
-      lowTimeAccumulator += duration;
-    } else {
-      highTimeAccumulator += duration;
+  if (currentVibrationState && !isVibrationActive) { // Vibration is active (LOW)
+    if (vibrationLowStartTime == 0) {
+      vibrationLowStartTime = currentTime;
     }
-
-    vibrationTotalLow = lowTimeAccumulator;
-    lowTimeAccumulator = 0;
-    highTimeAccumulator = 0;
-    interrupts();
-
-    vibrationWindowTotal -= vibrationHistory[vibrationHistoryIdx];
-    vibrationHistory[vibrationHistoryIdx] = vibrationTotalLow;
-    vibrationWindowTotal += vibrationTotalLow;
-    vibrationHistoryIdx = (vibrationHistoryIdx + 1) % VIBRATION_WINDOW_SIZE;
-
-    if (vibrationWindowTotal > VIBRATION_ACTIVE_THRESHOLD) {
+    if (currentTime - vibrationLowStartTime >= VIBRATION_STATE_CHANGE_INTERVAL) {
       isVibrationActive = true;
-    } else {
+    }
+    vibrationHighStartTime = 0; // Reset high timer
+  } else if (!currentVibrationState && isVibrationActive) { // Vibration is inactive (HIGH)
+    if (vibrationHighStartTime == 0) {
+      vibrationHighStartTime = currentTime;
+    }
+    if (currentTime - vibrationHighStartTime >= VIBRATION_STATE_CHANGE_INTERVAL) {
       isVibrationActive = false;
     }
+    vibrationLowStartTime = 0; // Reset low timer
+  } else if (currentVibrationState) {
+      vibrationHighStartTime = 0;
+  } else {
+      vibrationLowStartTime = 0;
   }
-  #endif
 
   // Light state change logic
   if (currentLightLevel >= LIGHT_ACTIVATION_THRESHOLD && !isLightActive) {
@@ -268,52 +206,30 @@ void loop() {
     lightHighStartTime = 0;
   }
 
-  // Device 1 (Vibration) Notifications
-  if (isVibrationActive != previousVibrationState) {
+
+  // Overall device state
+  bool previousDeviceState = isDeviceActive;
+  isDeviceActive = isVibrationActive || isLightActive;
+
+  if (isDeviceActive != previousDeviceState) {
     String message;
     String title;
     String priority;
-    if (isVibrationActive) {
-      message = String(DEVICE1_NAME) + " started.";
-      title = String(DEVICE1_NAME) + " START";
+    if (isDeviceActive) {
+      message = "Washing machine cycle started.";
+      title = "Machine START";
       priority = "default";
     } else {
-      message = String(DEVICE1_NAME) + " finished.";
-      title = String(DEVICE1_NAME) + " END";
+      message = "Washing machine cycle finished.";
+      title = "Machine END";
       priority = "high";
     }
 
     #ifdef ENABLE_NOTIFICATIONS
     if (!sendNotification(message, title, priority)) {
-      queuedMessage1 = message;
-      queuedTitle1 = title;
-      queuedPriority1 = priority;
-    }
-    #else
-    Serial.println("Notification (Disabled): " + title + " - " + message);
-    #endif
-  }
-
-  // Device 2 (Light) Notifications
-  if (isLightActive != previousLightState) {
-    String message;
-    String title;
-    String priority;
-    if (isLightActive) {
-      message = String(DEVICE2_NAME) + " active.";
-      title = String(DEVICE2_NAME) + " ACTIVE";
-      priority = "default";
-    } else {
-      message = String(DEVICE2_NAME) + " inactive.";
-      title = String(DEVICE2_NAME) + " INACTIVE";
-      priority = "high";
-    }
-
-    #ifdef ENABLE_NOTIFICATIONS
-    if (!sendNotification(message, title, priority)) {
-      queuedMessage2 = message;
-      queuedTitle2 = title;
-      queuedPriority2 = priority;
+      queuedNotification = message; // Failed to send, queue it (overwrites any older one)
+      queuedTitle = title;
+      queuedPriority = priority;
     }
     #else
     Serial.println("Notification (Disabled): " + title + " - " + message);
@@ -322,11 +238,10 @@ void loop() {
 
   #ifdef ENABLE_DISPLAY
   // Update display data
-  displayData[0] = String(DEVICE1_NAME) + ": " + String(vibrationWindowTotal);
-  displayData[1] = "Vibra: " + String(isVibrationActive ? "ON" : "OFF");
-  displayData[2] = String(DEVICE2_NAME) + ": " + String(currentLightLevel, 0);
-  displayData[3] = "Light: " + String(isLightActive ? "ON" : "OFF");
-  displayDataLines = 4;
+  displayData[0] = "Vibration: " + String(isVibrationActive ? "ON" : "OFF");
+  displayData[1] = "Light: " + String(currentLightLevel) + " lx";
+  displayData[2] = "Light Active: " + String(isLightActive ? "ON" : "OFF");
+  displayData[3] = "Device: " + String(isDeviceActive ? "ACTIVE" : "INACTIVE");
 
   // Update display
   updateDisplay();
@@ -370,46 +285,21 @@ void updateDisplay() {
   unsigned long currentTime = millis();
 
   // Scroll logic
-  if ((displayDataLines > displayTextLines) && (currentTime - lastDisplayScrollTime > DISPLAY_SCROLL_INTERVAL)) {
+  if (currentTime - lastDisplayScrollTime > DISPLAY_SCROLL_INTERVAL) {
     lastDisplayScrollTime = currentTime;
-    currentDisplayLine = (currentDisplayLine + 1) % displayDataLines;
+    currentDisplayLine = (currentDisplayLine + 1) % 4;
   }
 
   display.clearDisplay();
   display.setTextSize(1);
   display.setTextColor(WHITE);
+  display.setCursor(0, 0);
 
-  // Draw active status indicator
-  int rectWidth = 10;
-  int rectHeight = (SCREEN_HEIGHT / 2) - 2;
-  int rectX = 2;
-  int rectY1 = 1;
-  int rectY2 = (SCREEN_HEIGHT / 2) + 1;
-  
-  int textX = rectX + rectWidth + 4;
-
-  for (int i = 0; i < displayDataLines; i++) {
-    int lineIndex = (currentDisplayLine + i) % displayDataLines;
-    display.setCursor(textX, i * 8);
+  for (int i = 0; i < 4; i++) {
+    int lineIndex = (currentDisplayLine + i) % 4;
     display.println(displayData[lineIndex]);
   }
 
-  // Draw Device 1 Indicator (Top)
-  display.drawRect(rectX, rectY1, rectWidth, rectHeight, WHITE);
-  if (isVibrationActive) {
-    int innerWidth = rectWidth - 4;
-    int step = (millis() / 150) % (innerWidth + 1);
-    display.fillRect(rectX + 2, rectY1 + 2, step, rectHeight - 4, WHITE);
-  }
-
-  // Draw Device 2 Indicator (Bottom)
-  display.drawRect(rectX, rectY2, rectWidth, rectHeight, WHITE);
-  if (isLightActive) {
-    int innerWidth = rectWidth - 4;
-    int step = (millis() / 150) % (innerWidth + 1);
-    display.fillRect(rectX + 2, rectY2 + 2, step, rectHeight - 4, WHITE);
-  }
-
   display.display();
   #endif
 }

secrets_template.h

@@ -1,20 +0,0 @@
-/*
- * secrets_template.h
- *
- * INSTRUCTIONS:
- * 1. Copy this file to a new file named "secrets.h" in the same directory.
- * 2. Open "secrets.h" and populate the values below with your actual configuration.
- * 3. "secrets.h" is excluded from version control to protect your sensitive data.
- */
-
-#ifndef SECRETS_H
-#define SECRETS_H
-
-// WiFi credentials
-#define SECRET_WIFI_SSID "YOUR_WIFI_SSID"
-#define SECRET_WIFI_PASSWORD "YOUR_WIFI_PASSWORD"
-
-// ntfy.sh topic
-#define SECRET_NTFY_TOPIC "YOUR_NTFY_TOPIC"
-
-#endif